- The micro phase separation structure of urethane resin realizes “flexible adhesion” that combines toughness and flexibility.
- We have more than 30 years of experience with adhesives for various uses such as automotive panels which requires high reliability.
- Using the primer dedicated for the respective material improves the adhesion strength to various materials.
Achieve your needs with E-TEC
--- Emulsion Technology’s environment-friendly special purpose and solvent-free materials
Urethane adhesive MIGHTYGRIP™ 【MIGHTY series】
Over 30 years of experience with urethane adhesives
Product outline
Property
Product lineup
Hardness of Cured Resin | Soft Hard | |||||||||||||
Series | MS1200 | MG4000A | MG7600E | MG3000 | MG5000 | MLT2900 | ||||||||
Features | ・Softness ・High Shock absorption | ・High Elongation ・High stress relaxation | ・High stress relaxation ・Proven in automotive outer panel | ・High Lap shear strength and Peel strength | ・High Lap shear strength and Peel strength ・Proven in automotive outer panel |
・Hardness | ||||||||
Properties of uncured products | Product Name | Resin | Hardener | Resin | Hardener | Resin | Hardener | Resin | Hardener | Resin | Hardener | Resin | Hardener | |
MS1200 | MS1247G | MG4000A | MG4070 | MG7600E | MG7634 | MG3000 | MG3070 | MG5000 | MG5030 | MLT2900 | ML2937S | |||
Viscosity(Pa・s) at25℃ | 25 | 11 | 53 | 19 | 25 | 14 | 38 | 16 | 37 | 13 | 12 | 250 | ||
Specific gravity at25℃ | 1.34 | 1.2 | 1.29 | 1.2 | 1.27 | 1.26 | 1.23 | 1.37 | 1.45 | 1.26 | 1.58 | 1.27 | ||
Mixing ratio (Parts per weight) | 100 | 100 | 100 | 150 | 100 | 100 | 100 | 100 | 150 | 100 | 100 | 100 | ||
Curing Condition | 23℃×72h | 23℃×72h | 23℃×72h | 23℃×72h | 23℃×72h | 23℃×72h | ||||||||
Adhesive properties * | Lap shear strength(MPa) | 23℃ | 2.7 CF | 4.5 CF | 13 CF | 16 CF | 17 CF | 21 CF | ||||||
80℃ | 1.4 CF | 2.2 CF | 4.9 CF | 5.4 CF | 7.8 CF | 5.0 CF | ||||||||
-30℃ | 10 CF | 20 CF | 25 CF | 24 CF | 26 CF | 25 CF | ||||||||
T-Peel strength (N/25mm) | 23℃ | 160 CF | 200 CF | 320 CF | 320 CF | 310 CF | 260 CF | |||||||
Properties of cured products | Elongation at break (%) | 280 | 450 | 110 | 100 | 50 | 20 | |||||||
Young’s modulus (MPa) | 0.3 | 3.5 | 30 | 100 | 360 | 420 | ||||||||
Tensile strength at break(MPa) | 2 | 4 | 13 | 21 | 19 | 25 | ||||||||
Shore-D hardness | 20 | 60 | 27 | 58 | 70 | 72 |
-
*Substrate = ED-Steel , Failure mode : CF = Cohesive Failure, SF = Substrate Failure
Application
Field | Application | Materials |
Car | Spoiler, Roof, Door | CFRP/CFPR |
Cover top, Engine hood | CFRP/CFPR, SMC/SMC | |
Ceiling | Unwoven Fabric/Metal | |
Vehicle | Bus Trunk lid | FRP/FRP |
Refrigerator car Door | Aluminum/plywood | |
Bullet train Interior (ceiling) | FRP/Aluminum | |
House Facilities | Water purifier tank | FRP/FRP |
Kitchen counter | Polyethylene/SUS | |
Unit bath | Polyethylene/ABS | |
Architecture | Water tank panel | FRP/AES |
Automatic door | Glass/Aluminum | |
Exterior panel | Coated metal/rook wool | |
Swimming pool | FRP/FRP | |
Ship, Leisure | Fishing vessel, Water scooter | FRP/FRP |
Link
High Elongation and High Strength Adhesive MIGHTYGRIP5200
Acrylic adhesive for PP MIGHTYLOCK
Urethane-Acrylic hybrid type adhesive
Contact
EMULSION TECHNOLOGY CO., LTD.
Functional Chemicals Dept., Functional Chemicals Division
TEL : [81]3-6218-3841
Email : info@etec.jsr.co.jp